Everything on the airlerons is finished until they are installed on the wings, at that time the center hinge bushing will be installed, and ribs #7 & #8 will be permanently installed.
Today we cleaned all the mating surfaces with acetone, then applied the epoxy primer and riveted together. The spade skin and mass balance weight were installed. And the center hinge cover was slotted and finished up.
Now I guess I'm going to start working on the h-stab modification.
_________________
010010010010011101100100001000000111001001100001
011101000110100001100101011100100010000001100010
011001010010000001100110011011000111100101101001
011011100110011100100001
Login
FAQ
Search
