Last time I clecoed the whole skeleton together to see what it would look like. Today I drilled and deburred the rib to main spar and forward mount and doubler.
After deburring all parts mating surfaces are scuffed with scotch brite pads, then cleaned with acetone, and finally coated with 2 part epoxy primer. The parts are then clecoed together wet. Finally the rivets are each coated with the epoxy primer before inserting and pulling.
The green stuff you see in the photos is the 2 part epoxy primer.
| Attachments: |
File comment: Horizontal stab
2003_0503_120010AA.JPG [ 62.91 KiB | Viewed 14906 times ]
|
File comment: Horizontal stab
2003_0503_124612AA.JPG [ 64.58 KiB | Viewed 14907 times ]
|
File comment: Horizontal stab
2003_0503_135634AA.JPG [ 60.17 KiB | Viewed 14906 times ]
|
File comment: Horizontal stab
2003_0503_135821AA.JPG [ 58.06 KiB | Viewed 14906 times ]
|
File comment: Horizontal stab
2003_0503_140109AA.JPG [ 57.16 KiB | Viewed 14905 times ]
|
File comment: Horizontal stab
2003_0503_140117AA.JPG [ 49.71 KiB | Viewed 14904 times ]
|
File comment: Horizontal stab
2003_0503_140136AA.JPG [ 61.31 KiB | Viewed 14904 times ]
|
File comment: Horizontal stab
2003_0503_140154AA.JPG [ 46.62 KiB | Viewed 14901 times ]
|
_________________
010010010010011101100100001000000111001001100001
011101000110100001100101011100100010000001100010
011001010010000001100110011011000111100101101001
011011100110011100100001
Login
FAQ
Search
